Install Android 5.1.1 Lollipop LMY47V Factory Image On Nexus 10 – How To

Advertisement

The wait is over! You can now update your Nexus 10 to latest Android 5.1.1 Lollipop with the help of new LMY47V factory image. Yes! Android 5.1.1 Lollipop LMY47V factory image for Nexus 10 is now available for download and install. In this page you will learn a beginner guide to install Android 5.1.1 Lollipop LMY47V factory image on Nexus 10. Google already issued an OTA update but if you yet to receive OTA notification in your Nexus 10 device or unable to update it through OTA then you can install the firmware manually. All you need to do, download this official factory image and manually install (sideload) it on Nexus 10 using our guide. Once you flash this Android 5.1.1 Lollipop LMY47V factory image, you will lose the root access, however in our next article we will add how to root Nexus 10 running on official Android 5.1.1 Lollipop build LMY47V. We yet to know what changes it bring exactly but we learned it will improve the performance as well as fix battery draining issue.

Related: How To Root Nexus 10 On Official Android 5.1.1 Lollipop LMY47V

Advertisement

Warning!

This tutorial is only for Nexus 10. Don’t try this guide on any other Android device. Also, we are not responsible for any damage caused due to the instruction given in this page. Try this at your own risk. However, it is very unlikely that your device will be damaged if you follow all the instructions as it is which are mentioned in procedure.

Pre Requisites:

1. It’s advisable to backup your data prior flashing. I recommend app Helium for this purpose, however you can use any other preferred backup app. [General Guide]

Advertisement

2. Make sure your device have enough battery power (at least 50% battery power) to avoid any accidental brick. You can install an app like Battery Notifier BT Free on your Android device to check it easily.

3. You must have USB Driver Installed for Nexus 10 in your PC. If you manage to access your phone data after connecting to your computer then you already have USB driver installed. [Download Driver Manually]

4. Make sure USB Debugging is enabled otherwise it’s won’t be possible to transfer file between PC and Nexus 10. By default its enabled, so you don’t have to worry. [General Guide]

5. You must already installed ADB & Fastboot. Follow this guide: How To Setup ADB & Fastboot In Your Computer

If you done everything that we mentioned above then you are ready to follow step-by-step guide on how to install Android 5.1.1 Lollipop LMY47V factory image on Nexus 10.

File Required(Download by clicking on it)

  1. Download Android 5.1.1 Lollipop Image for Nexus 10 [Filename: mantaray-lmy47v-factory-91a865a6.tgz]

How to Install Android 5.1.1 Lollipop LMY47V Factory Image on Nexus 10

  1. Connect your device to PC using USB cable.
  2. Now turn off your Nexus 10.
  3. Now, boot into Fastboot or Bootloader Mode. To do so, press and hold both Volume Up and Volume Down, then press and hold Power until you see the Fastboot menu and START on top.
  4. Now extract downloaded factory image on your computer. Go to the folder mantaray-lmy47v and then copy/paste all the files to your Fastboot directory.
  5. Now perform following task depending on your OS. All mentioned files located within Fastboot folder.
    • On Windows: Run the file “flash-all.bat”.
    • On Mac: Run the file “flash-all.sh” using Terminal.
    • On Linux: Run the file “flash-all.sh”.
  6. Wait for the installation process to complete it, you may require to follow onscreen instruction in your Nexus 10.
  7. Once the installation process completed, your device will reboot automatically. The first boot usually take more time, so wait for it.

Congrats! Android 5.1.1 Lollipop LMY47V factory image is now installed and running on your Nexus 10.

Advertisement