Root I9295XXUCNI3 Android 4.4.2 KitKat firmware running on Galaxy S4 Active GT-I9295

Advertisement

An easy to follow rooting guide for I9295XXUCNI3 Android 4.4.2 KitKat firmware that running on Samsung Galaxy S4 Active GT-I9295 is now available at PrimeHowTo. You probably already installed XXUCNI3 Android 4.4.2 KitKat firmware that rolled out recently by Samsung. If don’t then update it using this tutorial: Update Galaxy S4 Active GT-I9295 with I9295XXUCNI3 Android 4.4.2 KitKat Official Firmware. Once you flash or install official firmware, your existing root access will be void. You must root it again, just like any other fresh Galaxy S4 Active I9295. The process is very much easy. All you have to do, flash a small zip file using Odin utility. Read through this guide to learn step-by-step procedure to root Galaxy S4 Active I9295 powered by I9295XXUCNI3 Android 4.4.2 KitKat firmware.

A rooted device offer you capability to completely utilize the hardware resource as well as eliminate any limitation that comes with stock or official firmware. In sort you can use your device the way you want. Once rooted, you can access system files, can overclock/underclock CPU and GPU, can use various MOD as well as those apps that ask root access. Please note, once you root your device, your manufacturer warranty will be void. You can always regain it by following proper unroot process (for example, flash official firmware and then use triangle away). You can learn more about benefits of rooting here: Benefits of Rooting Android Devices.

Advertisement

Recommended Reading: How To Disable KNOX Security Service on Samsung Galaxy Line Up

Before moving towards rooting of I9295XXUCNI3 Android 4.4.2 KitKat firmware, we have to go through some pre-requisites.

Warning: This tutorial is only for Galaxy S4 Active GT-I9295. Don’t try this guide on any other Android device. Also, we (PrimeHowTo) are not responsible for any damage caused due to the instruction given in this page. Try this at your own risk. However, it is very unlikely that your device will be damaged if you follow all the instructions as it is which are mentioned in procedure.

Pre Requisites:

Advertisement

Though root method mentioned below don’t erase internal memory data but we recommend to back up your data first before proceeding to avoid any accidental data lose.

1. It’s advisable to backup your data prior flashing. I recommend app Helium for this purpose, however you can use any other preferred backup app. [General Guide]

2. Make sure your device have enough battery power (at least 50% battery power) to avoid any accidental brick. You can install an app like Battery Notifier BT Free on your Android device to check it easily.

3. You must have USB Driver Installed for Galaxy S4 Active GT-I9295 in your PC. If you manage to access your phone data after connecting to your computer then you already have USB driver installed. [Download Driver Manually]

4. Make sure USB Debugging is enabled otherwise it’s won’t be possible to transfer file between PC and Galaxy S4 Active GT-I9295. [General Guide]

How To Root I9295XXUCNI3 Android 4.4.2 KitKat On Galaxy S4 Active GT-I9295

  1. Download Odin v3.09 and root file for I9295XXUCNI3.
  2. Extract CF-Auto-Root zip file that you downloaded earlier from above link, you will get a .tar.md5 file.
  3. Extract Odin zip file and you will get Odin3 v3.09.exe along with few other files.
  4. Power off your Android device. Wait 5-6 seconds for vibration to confirm complete switch off.
  5. Now, put the Galaxy S4 Active GT-I9295 in Download Mode by pressing and holding down the Home & Volume Down button together while pressing the Power button. A warning screen will come up; press Volume Up button to enter Download Mode.
  6. Now run Odin3 v3.09.exe (see Step 3) as an Administrator because Admin privileges is required to complete the process smoothly (only applicable Windows Vista and higher).
  7. When all done, connect your device to your PC using USB cable. You will see an “Added!!” massage in Odin’s message box. Try other USB port, preferably USB port located in back in your desktop PC if you don’t see the Added massage. In case, the solution don’t work then re-install USB driver. If you successfully see the “Added!!” message in Odin then you are ready to go in next step. You should also see COM port with a number in Yellow if you successfully added your device.
  8. Click the AP Button, and select that CF-Auto-Root-jactivelte-jactiveltexx-gti9295.tar.md5 file that you get in Step 2. If you using an earlier version of Odin then add the file to PDA button.
  9. In Odin window, make sure only Auto Reboot and F. Reset Time checkboxes are selected (default set up).
  10. Double check everything that we mentioned in Step 8 & Step 9 above. Now, once satisfied hit the START button to begin the flashing process.
  11. Once flashing completed, your Galaxy S4 Active GT-I9295 will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from computer. In case, you want to flash another file via Odin then hit Reset button.

Congrats! You just rooted I9295XXUCNI3 Android 4.4.2 KitKat firmware that running on Samsung Galaxy S4 Active GT-I9295. You can check your success by installing an app called “Root Checker” which is available for free from Google PLAY store. You can find some best root apps here: Best Apps For Rooted Android Devices (Android Phones & Tablets). Fix any root issue: Connect your device to internet then update SueperSU app binary. After that, open SueperSU again and turn off KNOX notification from there.

Advertisement