Update Galaxy Tab 4 7.0 LTE SM-T235 with T235XXU1ANJ6 Android 4.4.2 KitKat Official Firmware [How To]


Update your Galaxy Tab 4 7.0 LTE SM-T235 to T235XXU1ANJ6 Android 4.4.2 KitKat official stock firmware. The official firmware rolled out recently by Samsung in various countries including Kazakhstan, Russia and Nordic countries. With the help of our step by step guide you can easily update your device to this latest firmware. You can grab XXU1ANJ6 Android 4.4.2 KitKat firmware either from Kies or via OTA. However, if both of this official process don’t work for you then can always download and flash the firmware manually using a tool called Odin. Installing official firmware will override your custom recovery (CWM recovery, TWRP recovery etc.) as well as custom ROM (CM11, Paranoid Android, PAC-man, SlimKat etc.). Official firmware also a great tool to unroot your device as well as unbrick it.

How To Root T235XXU1ANJ6 Android 4.4.2 KitKat Firmware

A rooting tutorial for T235XXU1ANJ6 Android 4.4.2 KitKat firmware for Galaxy Tab 4 7.0 LTE SM-T235 isn’t available right now.


Please, try either OTA or Kies update instruction to update Galaxy Tab 4 7.0 LTE to T235XXU1ANJ6 Android 4.4.2 KitKat stock firmware. If both method failed then, you should try to install T235XXU1ANJ6 Android 4.4.2 KitKat firmware on Galaxy Tab 4 7.0 LTE SM-T235 manually.

Warning: This tutorial is only for Galaxy Tab 4 7.0 LTE SM-T235. Don’t try this guide on any other Android device. Also, we (PrimeHowTo) are not responsible for any damage caused due to the instruction given in this page. Try this at your own risk. However, it is very unlikely that your device will be damaged if you follow all the instructions as it is which are mentioned in procedure.

Pre Requisites:

Official firmware restore all existing data but to avoid any accidental data lose (such as fixing bootloop) always backup your existing data before proceeding.


1. It’s advisable to backup your data prior flashing. I recommend app Helium for this purpose, however you can use any other preferred backup app. [General Guide]

2. Make sure your device have enough battery power (at least 50% battery power) to avoid any accidental brick. You can install an app like Battery Notifier BT Free on your Android device to check it easily.

3. You must have USB Driver Installed for Galaxy Tab 4 7.0 LTE SM-T235 in your PC. If you manage to access your phone data after connecting to your computer then you already have USB driver installed. [Download Driver Manually]

4. Make sure USB Debugging is enabled otherwise it’s won’t be possible to transfer file between PC and Galaxy Tab 4 7.0 LTE SM-T235. [General Guide]

5. Manual update will be done using Odin utility which support Windows system only for now.

How To Update Galaxy Tab 4 7.0 LTE SM-T235 via OTA

  1. Make sure, you have a stable internet connection (Wi-Fi or data network).
  2. Now, go to Android app drawer and then select Settings.
  3. Then locate About Device and tap on it.
  4. Next select Software update from About device screen.
  5. Then tap on Update option.
  6. You should see an update, press OK to download and install. (Remember, download using 3G or network data will incur additional charges to your phone bill!)
  7. Soon your device will reboot to complete the installation process.

If you see “The latest update have already been installed” massage while checking update then your device yet to receive an OTA update. Check back within few days or jump to next procedure.

How To Update Galaxy Tab 4 7.0 LTE SM-T235 via Kies

  1. Make sure, you have a stable internet connection.
  2. Now download and install Samsung Kies on your computer.
  3. Turn on your device (if it off) and then connect it to computer via USB cable.
  4. Wait few minute and soon Kies will detect your Android device.
  5. You should notice a New Firmware Upgrade is available at Samsung Kies home screen.
  6. Press the Firmware Upgrade button to proceed.
  7. Follow on screen instruction and soon you will see your device running upgrade and reboot automatically. Once done, you can disconnect your device from computer.

Again! If you see “This is the latest firmware” in Samsung Kies, then your device (or country) yet to receive this latest update on Kies. Its good time to go for manual update instruction that located below.

Quick Notes:

  1. Flashing or installing official firmware will remove custom ROM including CM11, AOKP, Avatar, Beanstalk, Omni ROM, Slim ROM, Pac-Man, Paranoid Android, LiquidSmooth or Carbon.
  2. We always try to add resumable download link when available but since most download link comes from free host, you may not receive good speed. Also, we only add torrent when available from trusted source. To speed up your download you can always buy premium membership account.

T235XXU1ANJ6 Android 4.4.2 KitKat Firmware Download Links

Kazakhstan : T235XXU1ANJ6_T235SKZ1ANJ3_SKZ.zip

Russia : T235XXU1ANJ6_T235SER1ANJ3_SER.zip

Nordic countries : T235XXU1ANJ6_T235OXA1ANJ6_NEE.zip

[Note: You can install any firmware listed above despite availability in other countries, except those which comes with carrier name.]

*Download link last updated in 12-November-2014.

How To Install T235XXU1ANJ6 Android 4.4.2 KitKat On Galaxy Tab 4 7.0 LTE SM-T235 Manually

  1. Download Odin v3.09.
  2. Extract the downloaded firmware zip in your computer, you will get a .tar.md5 file along with some optional files. Please, don’t extract the file twice, else you will end up with some unflashable file.
  3. Now extract Odin zip file to get Odin3 v3.09.exe along with few other files.
  4. Power off your Android device and wait 5-6 seconds for vibration to confirm complete switch off.
  5. Now, put the Galaxy Tab 4 7.0 LTE SM-T235 in Download Mode by pressing and holding down the Home & Volume Down button together while pressing the Power button. You will soon see a warning screen; press Volume Up button to enter Download Mode.
  6. Now run Odin3 v3.09.exe (see Step 3) as an Administrator since Admin privileges is required to complete the process smoothly (only applicable Windows Vista and higher).
  7. When all done, connect your device to your PC using USB cable. You will see an “Added!!” massage in Odin’s message box. Try other USB port, preferably USB port located in back in your desktop PC if you don’t see the Added massage. In case, the solution don’t work then re-install USB driver. If you successfully see the “Added!!” message in Odin then you are ready to go in next step. You should also see COM port with a number in Yellow if you successfully added your device.
  8. Click the AP Button, and select that .tar.md5 file that you get in Step 2. If you using an eariler version of Odin then add the file to PDA button.
  9. In Odin window, make sure only Auto Reboot and F. Reset Time checkboxes are selected (deafult set up).
  10. Double check everything that we mentioned in Step 8 & Step 9 above. Now, once satisfied hit the START button to begin the flashing process.
  11. Once flashing completed, your Galaxy Tab 4 7.0 LTE SM-T235 will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from computer. In case, you want to flash another file via Odin then hit Reset button.

Congrats! You just updated your Galaxy Tab 4 7.0 LTE SM-T235 to T235XXU1ANJ6 Android 4.4.2 KitKat firmware. Go to Settings > About device to verify this firmware update.

How To Fix Boot Loop Issue On Galaxy Tab 4 7.0 LTE SM-T235

If Galaxy Tab 4 7.0 LTE SM-T235 stuck at booting animation for more than 10 minutes after final step then follow below instructions (it happen some time so don’t worry). Please note, the given solution will erase data that stored in mobile memory and not SD card data:

  1. Boot into recovery mode. To do so, press and hold the Volume Up and Power buttons together till Samsung logo flash twice then release Power button.
  2. Now perform Wipe data/Factory Reset and Wipe Cache Partition task before selecting reboot system now function. In recovery mode use Volume keys to navigate between options and Power button to select a option.